The way neodymium disc magnets manufacturers increase the magnetism of powerful disc magnets


In a simple way, we can re-magnetize neodymium disc magnets to reach a state of magnetization saturation. The method of magnetic circuit design concentrates the magnetic flux on the yoke to produce a strong attraction.

The way neodymium disc magnets manufacturers increase the magnetism of powerful disc magnets

1. In a simple way, we can re-magnetize neodymium disc magnets to reach a state of magnetization saturation.

2. The method of magnetic circuit design concentrates the magnetic flux on the yoke to produce a strong attraction.

neodymium disc magnets

3. Neodymium disc magnets can use the method of concentrating the magnetic lines of force, attaching a magnet plate to the magnet, and the magnet manufacturer will generate a higher magnetic field on the corners and edges of the magnet plate.

4. There is no need to worry if the magnetic force is not enough. You can add an iron sheet to the other wall of the magnet to strengthen the magnetic force. The neodymium disc magnets manufacturer uses the magnet surface at this time.

The shapes of neodymium disc magnets in practical applications are various, such as discs, cylinders, cylinders (with internal holes); square plates, squares, square pillars; tiles, sectors, trapezoids, polygons and various irregularities. Shape etc. Each shape of neodymium disc magnets has different sizes, and it is difficult to form them in one production process. The general production process is: Mr. produces large (large-size) blanks, after sintering and tempering, and then through mechanical processing (including cutting, punching) and grinding, surface coating (coating) treatment, and then proceed Magnet performance, surface quality and dimensional accuracy are tested, then magnetized, packaged and shipped out of the factory.